http://www.centexoffroadmilitia.com/general-tech-topics-f4/-t1.htm Discuss technical issues here. Any non-tech related discussions will be removed. Mon, 06 Sep 2010 03:26:32 GMT 10 http://i86.servimg.com/u/f86/13/26/59/30/newcor10.jpg http://www.centexoffroadmilitia.com/general-tech-topics-f4/-t1.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/hydro-steering-t1900.htm xjjs90 got all my hydro in, orbital valve, ram , cooler, resivor, plumed rite, bled it twice, everything seem to do ok until i would turn all the way eather to left or rite, then the high pressure line at the pump would blow, spraying fluid all over the fucken place. i check over everything, it did this twice. hopefully someone can shed some light on this. my orbital is a slow bastered, guy i baught it from said it had an open center . i ran the num , its an older valve but it is open, just slow ... General Tech Topics Mon, 06 Sep 2010 03:26:32 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/hydro-steering-t1900.htm#21256 http://www.centexoffroadmilitia.com/general-tech-topics-f4/hydro-steering-t1900.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/bumper-material-t1898.htm Carter I am in the process of building front and rear bumpers. I have the design sketched out, but can't decide on the thickness. What do you guys think ? 1/4 seems that it may be too heavy...but I want it to be sturdy. Then I just need to find someone to weld them up. General Tech Topics Sat, 04 Sep 2010 18:45:46 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/bumper-material-t1898.htm#21248 http://www.centexoffroadmilitia.com/general-tech-topics-f4/bumper-material-t1898.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/help-25-wont-start-t1892.htm YjMike Was driving to New Braunfels On Friday(after driving to San Antonio and back from San Marcos) on the way to NB, got caught up in a little traffic and the jeep started to run a little rough(wouldn't idle) and popped once really loud, like a back fire. Shortly after exiting the highway it started having more troubles idling and died. Thinking it was a spark issue, I replaced plugs, coil, coil wire, cap and rotor, verified that I am getting spark and that I'm still timed correctly, getting fuel, ... General Tech Topics Tue, 31 Aug 2010 01:01:32 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/help-25-wont-start-t1892.htm#21159 http://www.centexoffroadmilitia.com/general-tech-topics-f4/help-25-wont-start-t1892.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/94-4l60e-t1874.htm xjjs90
does it make senae that the (tps) throttle position sensor may cause the proplem ?]]> General Tech Topics Mon, 23 Aug 2010 01:07:31 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/94-4l60e-t1874.htm#21027 http://www.centexoffroadmilitia.com/general-tech-topics-f4/94-4l60e-t1874.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/classic-gov-lock-t1844.htm zukidave ]]> General Tech Topics Sat, 31 Jul 2010 00:37:49 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/classic-gov-lock-t1844.htm#20766 http://www.centexoffroadmilitia.com/general-tech-topics-f4/classic-gov-lock-t1844.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/repairing-yard-toy-s-t1760.htm zukidave and a weed eater and that shit need's a little
work now and then.

I've been thinking about starting
to do a little repair work on the side
so if any of you or some one you know need's any
of their lawn and garden equipment (mower's,trimmer's,chain saw's blower's)
looked at feel free to let me know and I will be glad
to help you out.]]> General Tech Topics Mon, 07 Jun 2010 04:09:01 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/repairing-yard-toy-s-t1760.htm#20107 http://www.centexoffroadmilitia.com/general-tech-topics-f4/repairing-yard-toy-s-t1760.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/landcruiser-summer-spiff-up-t1750.htm klinetime574 Hey Guys, Haven't posted much here, been a member for less than a year. Anyway I started some work on the cruiser the other day and thought I would share what I'm up to. I took off my inspection cover to finally find out what has been leaking, found out its my oil pan. So I ordered up a new gasket last Wednesday, haven't gotten it yet. Hope it comes soon. Some Oil Drips: Overtightened gasket last time So thats that. I also re-installed some factory coolant lines that ... General Tech Topics Mon, 31 May 2010 04:46:43 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/landcruiser-summer-spiff-up-t1750.htm#20019 http://www.centexoffroadmilitia.com/general-tech-topics-f4/landcruiser-summer-spiff-up-t1750.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/scrap-yard-around-austin-t1697.htm BigOrange90YJ What Junk yard or scrap yards for getting used parts do ya'll use or know about around the Austin area ? General Tech Topics Fri, 23 Apr 2010 04:18:43 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/scrap-yard-around-austin-t1697.htm#19613 http://www.centexoffroadmilitia.com/general-tech-topics-f4/scrap-yard-around-austin-t1697.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/dana-44-t1686.htm Shocker ]]> General Tech Topics Fri, 16 Apr 2010 01:31:20 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/dana-44-t1686.htm#19445 http://www.centexoffroadmilitia.com/general-tech-topics-f4/dana-44-t1686.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/v8-for-an-xj-t1682.htm Shocker ive been bouncing an idea around, and could use some insight. first things first is the 4.7 magnum that comes in the dakota/durango the samae as the 318 from the zj's, and if so will it bolt up to my aw4 auto in my xj or do i need the trans with it and if that the case will the motor/trans combo mate with my t-case..................all in all i want to stuff that small V8 into my xj anyone have an idea General Tech Topics Wed, 14 Apr 2010 01:39:28 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/v8-for-an-xj-t1682.htm#19373 http://www.centexoffroadmilitia.com/general-tech-topics-f4/v8-for-an-xj-t1682.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/tj-transfer-solenoids-t1668.htm Toecutter1978 Has anybody had any issue with their TJ Rubicon transfer shifting solenoids? This will be my fourth set in the past year. I am still getting them under warranty from the dealership. I replaced the harness also. Is there a company that memes better ones then the OE solenoids? General Tech Topics Wed, 07 Apr 2010 03:24:41 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/tj-transfer-solenoids-t1668.htm#19243 http://www.centexoffroadmilitia.com/general-tech-topics-f4/tj-transfer-solenoids-t1668.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/seafoam-t1650.htm Toecutter1978 ]]> General Tech Topics Fri, 02 Apr 2010 02:05:06 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/seafoam-t1650.htm#19102 http://www.centexoffroadmilitia.com/general-tech-topics-f4/seafoam-t1650.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/gear-install-t1629.htm geauxtigers
matt]]> General Tech Topics Mon, 22 Mar 2010 14:31:09 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/gear-install-t1629.htm#18833 http://www.centexoffroadmilitia.com/general-tech-topics-f4/gear-install-t1629.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/death-wobble-t1618.htm madscientist Ok, installed new 1" motor mounts last night drove home, no problems. Jumped in this morning, hit about 45 and I thought the front end was going to fall out. Stopped, took a look but saw nothing so I started again, it happened again. Third times a charm, started up again, no problems. Went out at lunch without any problems. Left the office and it happened again. On the third time it was fine. Anyone have any idea what is going on??? Steven General Tech Topics Thu, 18 Mar 2010 01:08:27 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/death-wobble-t1618.htm#18750 http://www.centexoffroadmilitia.com/general-tech-topics-f4/death-wobble-t1618.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/1-day-high-fender-job-anyone-t1620.htm Highjaxx I'm seriously considering doing the high fender conversion, but I don't think I have time before Canyons next weekend. I'm tossing around the idea of just pulling the fenders off completely and running Canyons without em and them taking the time after that to raise them. I was thinking about just cutting the crap out of them to make em fit, but I would have to butcher the fender behind the tire where the inner supports connect, likely ruining the fenders if I wanted to use them for tube fenders ... General Tech Topics Thu, 18 Mar 2010 23:32:48 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/1-day-high-fender-job-anyone-t1620.htm#18772 http://www.centexoffroadmilitia.com/general-tech-topics-f4/1-day-high-fender-job-anyone-t1620.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/jeep-soft-top-parts-t1513.htm Highjaxx
BD Company (800)-748-2244

I just ordered all new zipper sliders for around $35. This saved me from taking my Jeep to a Trim/Convertible Shop and having the whole rear zipper restitched on my soft-top cause one zipper pull/slider broke. I'm not sure what all else they carry, but could save you some time & money.]]> General Tech Topics Tue, 16 Feb 2010 21:47:28 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/jeep-soft-top-parts-t1513.htm#17722 http://www.centexoffroadmilitia.com/general-tech-topics-f4/jeep-soft-top-parts-t1513.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/need-help-with-mounting-hight-lift-asap-t1533.htm LURCH634 I am about to go out the the garage and install my high lift mounts. They are the 4rax (or whatever there called) mounts. I am getting a 36" high-lift and I need to know if there is a certian space I need to distance the mounts so they will line up with the holes. General Tech Topics Sun, 21 Feb 2010 02:24:06 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/need-help-with-mounting-hight-lift-asap-t1533.htm#17896 http://www.centexoffroadmilitia.com/general-tech-topics-f4/need-help-with-mounting-hight-lift-asap-t1533.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/rubicon-diff-mod-t1592.htm Toecutter1978 www.wonderingtrail.com]]> General Tech Topics Wed, 10 Mar 2010 02:09:20 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/rubicon-diff-mod-t1592.htm#18522 http://www.centexoffroadmilitia.com/general-tech-topics-f4/rubicon-diff-mod-t1592.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/i-have-t1562.htm Ptr that is all.]]> General Tech Topics Wed, 03 Mar 2010 05:09:10 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/i-have-t1562.htm#18225 http://www.centexoffroadmilitia.com/general-tech-topics-f4/i-have-t1562.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/hey-scourge-t1563.htm zukidave you for a 8" ram ]]> General Tech Topics Wed, 03 Mar 2010 05:17:50 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/hey-scourge-t1563.htm#18226 http://www.centexoffroadmilitia.com/general-tech-topics-f4/hey-scourge-t1563.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/new-rims-tires-t803.htm Justin Jeep Hey guys, I am wanting to do a lift on my 2008 wrangler unlimited X. I heard that i may possibly be able to put on tires and rims on a stock height wrangler. Bassically, if this is true, without having issues when wheelin how big can i go without a lift? (Lift will be coming later, just going a little bit at a time. General Tech Topics Fri, 05 Jun 2009 04:08:57 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/new-rims-tires-t803.htm#9744 http://www.centexoffroadmilitia.com/general-tech-topics-f4/new-rims-tires-t803.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/who-wants-to-help-me-make-a-stinger-for-my-bumper-t1537.htm LURCH634 ]]> General Tech Topics Mon, 22 Feb 2010 20:41:07 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/who-wants-to-help-me-make-a-stinger-for-my-bumper-t1537.htm#17964 http://www.centexoffroadmilitia.com/general-tech-topics-f4/who-wants-to-help-me-make-a-stinger-for-my-bumper-t1537.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/roll-cage-q-s-t1506.htm Highjaxx Thinking about the roll cage as the next upgrade to the Jeep, I know that the front A-pillars and dash/windshield spreader bars will be added/upgraded. My real question is regarding the choice between simply adding to the original roll cage, or doing a full replacement cage. The rig gets used for light to medium crawling and trail riding. No 40MPH jumps in my future. I thought I remembered hearing that if you take a hard roll you should probably replace the entire cage anyway for safety. So should ... General Tech Topics Sat, 13 Feb 2010 20:14:13 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/roll-cage-q-s-t1506.htm#17618 http://www.centexoffroadmilitia.com/general-tech-topics-f4/roll-cage-q-s-t1506.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/machine-shop-t1492.htm Silverback I need to press my wheel bearing assemblies out of my spindles and then re-press new ones in... anyone know of a place here in Austin (preferably north Austin) to do this? General Tech Topics Mon, 08 Feb 2010 01:12:23 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/machine-shop-t1492.htm#17400 http://www.centexoffroadmilitia.com/general-tech-topics-f4/machine-shop-t1492.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/flat-towing-opinion-t1416.htm Unoman Going wheeling on the 23rd is the plan, but I might also meet some friends up at Colorado Bend Saturday evening for camping. The question is: what is your opinion on flat towing a rig all over the place, that many miles? Would ya? Austin to Llano, Llano to Bend, Bend to Austin. Comments....and don't get a tow rig and trailer b/c that is not in the cards. General Tech Topics Thu, 14 Jan 2010 16:21:40 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/flat-towing-opinion-t1416.htm#16577 http://www.centexoffroadmilitia.com/general-tech-topics-f4/flat-towing-opinion-t1416.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/death-wobble-of-doom-t1332.htm BigOrange90YJ Awesome, now i get a death wobble in my front end if i go faster then 40 General Tech Topics Mon, 14 Dec 2009 05:35:08 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/death-wobble-of-doom-t1332.htm#15605 http://www.centexoffroadmilitia.com/general-tech-topics-f4/death-wobble-of-doom-t1332.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/homebrew-tie-rod-t1387.htm Ptr So my TRE's are blown to shit and I ordered a complete tie rod assembly since it was only a few extra bucks to get. Now that I'll have my original tie rod, I would like to keep it as a spare. It is possible for me to sleeve it with DOM? If so, what diameter and wall thickness would you recommend I use? And since the TRE's are shot, can I use heim's? Any input would be appreciated. Btw, if it requires welding or fabrication (which it probs will) then that's a big plus General Tech Topics Sat, 02 Jan 2010 22:25:02 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/homebrew-tie-rod-t1387.htm#16112 http://www.centexoffroadmilitia.com/general-tech-topics-f4/homebrew-tie-rod-t1387.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/welding-assistance-t1374.htm Ben91YJ
Ben]]> General Tech Topics Tue, 29 Dec 2009 04:14:16 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/welding-assistance-t1374.htm#15970 http://www.centexoffroadmilitia.com/general-tech-topics-f4/welding-assistance-t1374.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/post-weber-carb-install-t1335.htm BigOrange90YJ HERE on the Jeep Forum with all my details and pictures. Any help would be great. Thanks

-Donovan]]> General Tech Topics Tue, 15 Dec 2009 06:37:04 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/post-weber-carb-install-t1335.htm#15658 http://www.centexoffroadmilitia.com/general-tech-topics-f4/post-weber-carb-install-t1335.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/ummm-yeah-t1327.htm BigOrange90YJ So, I was driving. Hit a small bump, noticed a noise; thought i poped a tire or something. Then i look out the driver side window behind me and see my spare dragging on the ground. My tire carrier snapped off of my bumper, about an inch of steel clean broke off, and I dragged it about 500 feet to a stop. The dumbass behind me didn't even honk during the 30 seconds i was trying to figure out what the noise was. My spare is destroyed, rubbed flat on the outside wall. When I got home a few gallons ... General Tech Topics Thu, 10 Dec 2009 04:22:01 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/ummm-yeah-t1327.htm#15484 http://www.centexoffroadmilitia.com/general-tech-topics-f4/ummm-yeah-t1327.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/help-drive-shaft-too-long-t1312.htm Ben91YJ Ok, the details. Swapped in an 8 lug HP D44 and a Blue Torch Fab Full Width Kit on our YJ. Dug up a 1310 yoke from the salvage yard(yes I know it small and small sucks). Stock drive shaft is about 1 inch too long to even bolt up so its probably really more like 2 or more inches too long to account for travel. I just want to shorten this thing up so I can actually use 4wd in the Jeep for the first time in at least a year. Does anyone know of a place near the Temple area where I can get it shortened? ... General Tech Topics Sun, 06 Dec 2009 17:00:28 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/help-drive-shaft-too-long-t1312.htm#15307 http://www.centexoffroadmilitia.com/general-tech-topics-f4/help-drive-shaft-too-long-t1312.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/going-from-open-dana-35-to-limited-slip-t1270.htm crisdo I picked up gears from a dana 35 this weekend and the guy gave me the limmited slip carrier for it also. Any one have a clue to were I could find out what else I need to put it in???? I know I need the plates and clucthes for it were could I pick those up?? General Tech Topics Mon, 23 Nov 2009 03:00:03 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/going-from-open-dana-35-to-limited-slip-t1270.htm#14705 http://www.centexoffroadmilitia.com/general-tech-topics-f4/going-from-open-dana-35-to-limited-slip-t1270.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/stupid-ass-locking-gas-cap-t1236.htm warfnation All I have to say is the the stupid ass locking gas cap that my Jeep came with was as usless as the plastic that is is made of. Today went to fill the Jeep up and the gas cap would not come off. Worked and work with it. No luck. Came home and did a quick search online and guess what it was 2 minutes and a BFS(Big Fucking Srew Driver) and problem solved. Broke the cap and replaced it with a not locking type. I honestly cant believe that it was that simple to fix. Or even that simple to get ... General Tech Topics Sat, 14 Nov 2009 20:27:21 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/stupid-ass-locking-gas-cap-t1236.htm#14247 http://www.centexoffroadmilitia.com/general-tech-topics-f4/stupid-ass-locking-gas-cap-t1236.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/regearing-my-tj-t1192.htm madscientist
mad]]> General Tech Topics Thu, 05 Nov 2009 03:20:06 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/regearing-my-tj-t1192.htm#13801 http://www.centexoffroadmilitia.com/general-tech-topics-f4/regearing-my-tj-t1192.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/help-t1176.htm BigOrange90YJ I took the drop out of my transfer case because i hardly had any slip room on my 1 inch extended drive shaft, now im getting really scary vibrations only at about 30-35 mph and then it stops, haven't really exceeded 45 since the drop was removed General Tech Topics Sun, 01 Nov 2009 05:40:36 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/help-t1176.htm#13623 http://www.centexoffroadmilitia.com/general-tech-topics-f4/help-t1176.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/carb-needs-help-t1045.htm BigOrange90YJ I plan on replacing my carb in the very near future, but as of right now the jeep is very irritating to drive and stalls every time i push the clutch in and come to a stop, it has always idled really rough, but this is getting way too annoying and worse as time goes on. For those of you that have carb experience could you help me on how to adjust the carb for the time being until i get my new one? Thanks, Donovan General Tech Topics Sun, 27 Sep 2009 04:03:39 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/carb-needs-help-t1045.htm#12227 http://www.centexoffroadmilitia.com/general-tech-topics-f4/carb-needs-help-t1045.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/rock-sliders-t1154.htm Shocker want to add some sliders to my xj, but im not sure what to look for. need to know what will give my rig the best protection. or if some one can fab up a solid set. just shoot me some insight or a quote. General Tech Topics Tue, 27 Oct 2009 01:15:41 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/rock-sliders-t1154.htm#13420 http://www.centexoffroadmilitia.com/general-tech-topics-f4/rock-sliders-t1154.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/god-damn-it-t1114.htm BigOrange90YJ why does this thing do nothing but break every 2 weeks, driving nice and smooth on the way home today, and POW my brand new U joint falls apart and and i have to get bumper towed home... its startin to really piss me off, now i need new straps because there all torn up and whatever the part that goes into the dana 35 is all torn up too from the floppin shaft General Tech Topics Tue, 20 Oct 2009 02:28:09 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/god-damn-it-t1114.htm#13070 http://www.centexoffroadmilitia.com/general-tech-topics-f4/god-damn-it-t1114.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/purple-stuff-t1103.htm BigOrange90YJ I looked at the floor in the jeep today and there is a purple liquid that is dry that looked like it was pushed through the cracks on the cover inside over the transmission, also noticed a little bit of this purple on the edges of the transmission panel General Tech Topics Sun, 18 Oct 2009 02:56:53 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/purple-stuff-t1103.htm#13009 http://www.centexoffroadmilitia.com/general-tech-topics-f4/purple-stuff-t1103.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/no-pickle-fork-no-one-open-how-the-hell-t1092.htm LURCH634 anyone up late with me? I am trying to take off my track bar and I don't have a pickle fork to get the ball joint off. I dont want to cut if off either. any other suggestions. General Tech Topics Wed, 14 Oct 2009 05:23:51 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/no-pickle-fork-no-one-open-how-the-hell-t1092.htm#12887 http://www.centexoffroadmilitia.com/general-tech-topics-f4/no-pickle-fork-no-one-open-how-the-hell-t1092.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/eletric-winch-leak-t1089.htm BigOrange90YJ
There was a very large puddle of oil under my winch and I'm not even sure if it came out of the winch. I could not find any drip or leak streaks on the winch itself, just on the ground under it. My winch sits in the garage on the floor when im not using it.]]> General Tech Topics Tue, 13 Oct 2009 04:37:49 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/eletric-winch-leak-t1089.htm#12802 http://www.centexoffroadmilitia.com/general-tech-topics-f4/eletric-winch-leak-t1089.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/d60-and-shocks-t1080.htm one80seven So today i got a wonderful offer. A guy in my performance class is building a 1960 Ford 3/4 ton pickup and wants to replace his D60 with a 14 bolt. Soooo he asked if i wanted it for $50 or so and I told him YES! Should be a 35 spline with 4.10's. Quite stout. Will be nice for when I 4 link the rear. Also I need to order some front shocks cause the shocks i have on it now are barely long enough to even bolt up. It up to about 5" of lift in the front and I want to get a long enough shock for ... General Tech Topics Thu, 08 Oct 2009 06:57:37 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/d60-and-shocks-t1080.htm#12691 http://www.centexoffroadmilitia.com/general-tech-topics-f4/d60-and-shocks-t1080.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/shoocks-came-but-with-problems-t1067.htm Shocker ]]> General Tech Topics Sat, 03 Oct 2009 00:46:47 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/shoocks-came-but-with-problems-t1067.htm#12529 http://www.centexoffroadmilitia.com/general-tech-topics-f4/shoocks-came-but-with-problems-t1067.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/456-versus-488-t718.htm TRUBL so i have been chewing on the thought of regearing and i am really not sure which way to go. I am running 4.10s now with 36 inch TSLs. I am not planning on going to a bigger tire right now but i would like to regear i feel like i might be putting a little too much on the stock 4.10s.... what are yalls thoughts and why? General Tech Topics Mon, 27 Apr 2009 13:48:25 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/456-versus-488-t718.htm#8975 http://www.centexoffroadmilitia.com/general-tech-topics-f4/456-versus-488-t718.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/jeep-oil-fix-t1053.htm Silverback
http://www.ifsja.org/forums/vb/showthread.php?t=102133]]> General Tech Topics Tue, 29 Sep 2009 19:07:22 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/jeep-oil-fix-t1053.htm#12386 http://www.centexoffroadmilitia.com/general-tech-topics-f4/jeep-oil-fix-t1053.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/how-to-replace-pickup-coil-sensor-t1004.htm ColtsTJ i heard it was easy and im sure it is but just want to make sure before i go at. anyone have a write up or a link to one? General Tech Topics Tue, 15 Sep 2009 19:34:18 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/how-to-replace-pickup-coil-sensor-t1004.htm#11726 http://www.centexoffroadmilitia.com/general-tech-topics-f4/how-to-replace-pickup-coil-sensor-t1004.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/cherokee-question-t960.htm rhinoed89xj
i just bought a 96 with a really strong 4.0 but its 2wd and my 89 is already lifted and i just put 4.10 in the rear axle but the motor is bad. ive got a delima and need some advise so please advise away.]]> General Tech Topics Sun, 23 Aug 2009 14:25:09 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/cherokee-question-t960.htm#11198 http://www.centexoffroadmilitia.com/general-tech-topics-f4/cherokee-question-t960.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/might-come-in-handy-some-day-t974.htm Silverback
http://thereifixedit.com/]]> General Tech Topics Mon, 31 Aug 2009 16:18:44 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/might-come-in-handy-some-day-t974.htm#11336 http://www.centexoffroadmilitia.com/general-tech-topics-f4/might-come-in-handy-some-day-t974.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/i-guess-this-goes-here-t959.htm zukidave I've been wanting to get a little fab/welding shop business going for a while so I guess it's time to get off my ass and just do it. ZukiWerx offroad fab. From a simple bolt on lift to a full on custom suspension, cage work, bumper's, rock slider's if you need it built get it Zukibuilt. http://zukiwerx.forumotion.net/forum.htm I'm building the new buggy to show my work and let folk's see it first hand while I'm wheelin. General Tech Topics Fri, 21 Aug 2009 22:53:02 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/i-guess-this-goes-here-t959.htm#11183 http://www.centexoffroadmilitia.com/general-tech-topics-f4/i-guess-this-goes-here-t959.htm http://www.centexoffroadmilitia.com/general-tech-topics-f4/40-question-t949.htm rhinoed89xj can a 4.0 mated to an auto be put into a jeep with a 5 speed. just wondering how much of a hassle it would be. General Tech Topics Wed, 19 Aug 2009 19:10:57 GMT http://www.centexoffroadmilitia.com/general-tech-topics-f4/40-question-t949.htm#11130 http://www.centexoffroadmilitia.com/general-tech-topics-f4/40-question-t949.htm